Cost-effective solution for fuel saving and a reduction in maintenance cost.

Increase power by 15% and save fuel up to 40% (depending on type of fuel)

  • CO level of 0% with Propelgol® petrol
  • Reduces CO2 emissions up to 40%
  • Reduces engine wear by 40% and emissions by 68%
  • Reduces raw hydrocarbons up to 100%, making your engine ‘greener’
  • Provides corrosion control in the fuel system, improving storage stability
  • Improves combustion efficiencies
  • Maintaining the engine’s original fuel injection pattern and keeps the injectors clean
  • Contains no pesticides or biocides
  • Meets the EN-228 standard and EN-590

What does Propelgol® do for the environment?

Dependency on fossil fuels is one of the key energy concerns currently facing the world. In November 2008, the UK Climate Change Act (CCA) gained Royal Assent, setting a legally binding target for the UK to reduce its emissions by 80% by 2050 against a 1990 baseline (Defence Management Journal 56). By using Propelgol®, the government could reduce its land vehicle emissions output by 68%.
The result a lower environmental impact.

Lifecycle of the electric car in compared to the normal combustion car.*

In their complete lifecycle electric cars produce between 20 and 24% less emissions than a normal petrol car and compared to a diesel car between 10 and 14%. When we add Propelgol® to the fuel the ordinary combustion cars will be cleaner in their lifecycle than the electric car. Propelgol® reduces the emissions for a petrol car with up to 40% which will give a reduction in the emission footprint of maximum 20% compared to an electric car. Diesel engines will be 20% cleaner than an electric car. Also less copper, nickel and aluminium is needed to produce cars. The recycling of an electric car produces a lot of chemical waste that has to be dealt with.

*Statistics from the Norwegian University for science and technology in Trondhiem, Study “Comparative Environmental Life Cycle Assessment of Conventional and Electric Vehicles”.

“The world will require 50% more energy in 2030 than it did in 2005 almost all of which will be derived from synthetic and biofuel sources” – 19th December 2008 EIA, International Energy Outlook 2008. Propelgol® has the power to reduce crude oil dependent fuel consumption by as much as 30%, while requiring no crude oil to produce it. Imagine the impact.

 

 

Propelgol® for all crude oil based fuels

Propelgol® can be used in all fuels based on crude oil. There is a specific type of Propelgol® additives for each fuel, which makes it more efficient.

Use the right type for the right fuel. The diesel additive does not work properly in petrol and the petrol additive does not work properly in diesel. Using the wrong type of Propelgol® does not harm your engine but will not give the benefits you expect.

Using Propelgol® Diesel Fuel treatment, you dose 1ml per liter of fuel (1:1000) For Propelgol® Petrol Fuel treatment, you dose 0,5ml per liter of fuel (1:2000)

afbeelding-motor

 

 

Propelgol® is avaiable for all kinds of fuel:

Propelgol® diesel

This additive is specially designed for use in diesel fuel and
diesel engines. Dosing is 1:1000

All components in combination with diesel fuel create a very powerful fuel that saves up to 3O% fuel, reducing CO2 up to 30%.

Propelgol® petrol

This additive is specially designed for use in petrol fuel and
petrol engines. Dosing is 1:2000

All components in combination with petrol fuel create a very powerful fuel that saves up to 4O% fuel, reducing CO2 up to 40%

Propelgol® marine diesel

This additive is specially designed for use in diesel fuel and marine
diesel engines. Dosing is 1:1000

All components in combination with diesel fuel create a very powerful fuel that saves up to 3O% fuel. It also helps with the water
problem in marine diesel fuel, reducing CO2 up to 30%.

Propelgol® kerosene

This additive is specially designed for use in kerosene fuel and
kerosene engines. Dosing is 1:1000

All components in combination with kerosene fuel create a very powerful fuel that saves up to 3O% fuel, reducing CO2 up to 30%

Propelgol® fuel oil

This additive is specially designed for use in fuel oil and fuel oil
diesel engines. Dosing is 1:1000

All components in combination with fuel oil fuel create a very powerful fuel that saves up to 3O% fuel, reducing CO2 up to 30%

Propelgol® GTL

This additive is specially designed for use in GTL. Dosing is 1:1000

All components in combination with fuel oil fuel create a very powerful fuel that saves up to 20% fuel, reducing CO2 up to 20%

Calculate your saving in money

To calculate your saving in money;
Put in the number of the price of fuel and you will get the saving per Litre depending on the price you put in, if this is per litre.

Fuel price10% garantied saving
Cost of Propelgol® Nett saving

1,75 0,175 0,04 0,135
propelgol-bottle

Become a dealer

We are looking for dealers all over the world.
If you are interested to become a dealer please visit our dealer page.
Contact us for more information on the product.


Become a dealer Find a dealer